1. Only burn dry, cured wood—logs that have been split, stacked, and dried for eight to 12 months. Cover your log pile on top, but leave the sides open for air flow.

Hardwoods such as hickory, white oak, beech, sugar maple, and white ash burn longest, though dry firewood is more important than the species. Less dense woods like spruce or white pine burn well if sufficiently dry, but you’ll need to add more wood to your fire more often, according to the Chimney Safety Institute of America (CSIA).

2. Burn firewood and only firewood! Crates, lumber, construction scraps, painted wood, or other treated wood releases chemicals into your home, compromising air quality. Log starters are fine for getting your wood fireplace going, but they burn very hot; generally only use one at a time.

3. Close the damper when not using your wood fireplace to prevent warm indoor air—and the dollars you’re spending to heat it—from rushing up the chimney.

4. Keep bifold glass doors open when burning a fire to allow heat to get into the room. On a factory-built, prefab wood fireplace with a circulating fan, keep doors closed to prevent unnecesary heat loss.

5. Have a chimney cap installed to prevent objects, rain, and snow from falling into your chimney, and to reduce downdrafts. Caps have side vents so smoke escapes. A chimney sweep usually provides and can install a stainless steel cap, which is better than a galvanized metal one because it won’t rust. Caps cost $50 to $200.

6. Replace a poorly sealing damper to prevent heat loss. A top-mounted damper that also functions as a rain cap provides a tighter closure than a traditional damper for your wood fireplace.

7. Install carbon monoxide detectors and smoke detectors in your house—near your wood fireplace as well as in bedroom areas.

8. Get your chimney cleaned twice a year if you burn more than three cords of wood annually. A cord is 4 feet high by 4 feet wide by 8 feet long, or the amount that would fill two full-size pickup trucks.

9. To burn a fire safely, build it slowly, adding more wood as it heats. Keep the damper of your wood fireplace completely open to increase draw in the early stages. Burn the fire hot, at least occasionally—with the damper all the way open to help prevent smoke from lingering in the fireplace and creosote from developing.